Basic Metal Lubricant

High performance neat cutting oil

Description

Matrix Cut 14 AT is a light mineral oil type cutting fluid formulated from selected paraffinic oils fortified with stable additives that gives high performance in machining operations. Does not contain chlorine or heavy metals.

Heavy duty machining neat cutting fluid

Description

Cut 17 MI is a mineral oil type active cutting fluid formulated from selected stable additives. The balanced additives maximizes performance over the wide range of pressures and temperatures encountered when machining difficult metals and difficult conditions.

Description

FDX 1001 AL is a low viscosity evaporating oil specially formulated for stamping and forming applications. It contains polar compounds to achieve most effective operations. The main advantage is that parts do not need to be decreased due to the low residue.

Tube drawing oil

Description

FDX 1030 CU is a neat oil specially formulated for tube drawing and forming  applications of copper, bronze  and  aluminium. Product has very good  lubricity and does not leave residues after annealing treatments.

Lapping and honing neat cutting oil

Description

Cut 61 A is a low viscosity oil specially formulated for finishing operations with a low tendency to oil mist.

Applications

Cut 61 A is designed for lapping, honing and grinding operations. It is also suitable for sharpening of disks and tools. It is suitable for steel, iron and cast iron.

Cutting fluid for manual operations

Description

Cut ADE is a cutting fluid for direct application specially formulated for drilling, threading, reaming and severe machining of steel in severe working conditions. It contains EP additives that avoid welding of tool and part and built-up edge formation thanks to the anti-seize properties.

Machining neat cutting oil

Description

Cut 34 BT has been formulated from selected paraffinic base oils fortified with special stable additives.

Cut 34 BT is a non-active cutting oil that maximizes performance over the wide range of pressures and temperatures encountered when machining under difficult conditions.

Penetrating multi-purpose universal oil

Description

FDX 1001 WD is a multifunctional light oil designed to assist in the separation and disassembly of rusted mechanical assemblies. Protects hand tools and small machinery from corrosion. This product also keeps linkages, pivot arms and cables rust free, lubricated and smooth running

Fully synthetic neat cutting oil 

Description

Cut BIO A is a synthetic oil of high chemical stability and good oxidation resistance. It is recommended for metal machining operations where performance is required and does not contain chlorine compounds and due to its nature Cut BIO A is readily biodegradable.

Heavy duty machining neat cutting oil

Description

Cut 222 MT is a mineral oil type neat cutting fluid formulated with polar compounds, anti-wear and extreme pressure additives. The balanced additives maximize performance over the wide range of pressures and temperatures seen when machining difficult metals and conditions. 

Cut 05 MT

Machining neat cutting oil

Description

Cut 05 MT is a universal cutting fluid formulated from judiciously selected components. The balanced additives maximizes performance over the wide range of pressures and temperatures seen when machining difficult metals and difficult conditions.

Quenching fluid

Description
FDX S RV fluids have been developed for heat treatment of ferrous metals in a wide variety of quenching operations. The fluid is formulated with carefully selected additives to achieve enhanced oxidation resistance and faster cooling rate.

Cold forming oil

FDX Inox is an oil specially formulated to lubricate cold forming applications.

It contains polar and extreme pressure (E.P.) to produce a product with the proper balancing characteristics.

Application

FDX Inox is suitable for stainless steel forming and severe drawing of all types of steel.

Stamping & Forming fluid

Description
FDX 8100 is a low viscosity evaporating oil specially formulated for stamping and forming applications.
The main advantage is that parts do not need to be de greased due to the low residue left on the parts that evaporates in
a short time.

Stamping and drawing fluid

Description
FDX 7110 is an EP fortified specially formulated fluid for stamping and drawing applications. This product is suitable for chip-less operations, medium and deep drawing operations of steel.

Applications
Cold drawing of iron and steel, specially for stamping and sheet cutting.

Stamping and drawing fluid

FDX 7006 is an EP fortified specially formulated fluid for stamping and drawing applications.

This product is suitable for chip-less operations, medium and deep drawing operations of steel.

Applications

Cold drawing of iron and steel, specially for stamping and sheet cutting.

Cold rolling soluble oil

FDX 600 is a soluble oil specially designed for steel cold rolling on multi-stand mills. It contains anti-wear additives that ensures longer life for rollers.

Stamping and forming fluid

FDX 59 is a forming oil specially formulated for fine blanking of metals up to 12 mm thickness. Thanks to its EP additives it assures longer life of tools and dies.

Applications

FDX 59 is suitable for conventional cutting, magnetic strips cutting and fine blanking.

Tube drawing soluble oil

FDX 580 is a water soluble oil developed for the tube drawing of steel and galvanized steel. The product has been formulated to form high stable emulsions for use in individual and centralized systems.

Stamping & Forming fluid

Description
FDX 5100 is a low viscosity evaporating oil specially formulated for stamping and forming applications.
The main advantage is that parts do not need to be de greased due to the low residue left on the parts that evaporates in a short time.

Wire drawing oil

Description
FDX 442 A is an EP fortified fluid specially formulated for aluminium wire drawing. The synergistic combination of EP additives, lubricity and polar compounds make it especially suitable for obtaining high efficiency and performance. FDX 442 A is chlorine free.

Stamping and drawing oil

FDX 411 is an oil with EP properties that does not contain chlorine compounds and is especially formulated for stamping and drawing applications. The combination of E.P. additives, lubricity and polar compounds assures you high efficiency.

Due to the excellent lubricant properties of FDX 411, dies and punches last longer.

Water miscible copper wire drawing lubricant

Description
FDX 30 CU is specially formulated water miscible fluid specially designed for universal drawing of copper rods, intermediate and fine wires. The combination of synthetic additives gives an excellent surface finishing. Special copper anti-corrosion inhibitors protect good protection against corrosion.

Stamping oil

FDX 240 A is an EP fortified fluid, specially formulated for aluminium stamping and drawing operations. The synergistic combination of EP additives, lubricity and polar compounds make it specially suitable for obtaining high efficiency and ultimate performance. The product does not contain chlorine compounds